303 A Study of Fractal Order and Chaos Emergence Mechanisms Based on Finite-Level Continued Fraction Sequences
688
0
·
2026/05/22
·
7分鐘
☕
喜歡作者的文章嗎?馬上按「關注」,當作者發佈新文章時,思書™就會 email 通知您。
思書是公開的寫作平台,創新的多筆名寫作方式,能用不同的筆名探索不同的寫作內容,無限寫作創意,如果您喜歡寫作分享,一定要來試試! 《 加入思書》
思書™是自由寫作平台,本文為作者之個人意見。
文章資訊
本文摘自:
分類於:
⟩
⟩
日期:
創作於:2026/05/22,最後更新於:2026/11/12。
合計:1739字
給本文個喜歡
或不
關於作者
I love science as much as art, logic as deeply as emotion.
I write the softest human stories beneath the hardest sci-fi.
May words bridge us to kindred spirits across the world.
Research on Fractal Order and the Emergence Mechanism of Complex Forms Based on Finite-Level Continued Fraction Sequences
Author: Zhang Suhang
Address: Luoyang, Henan, China
Abstract
Fractal geometry and continued fractions belong to two research directions, geometry and number theory, respectively, and the intrinsic connection between them has rarely been specifically explored. In the classical framework, the attractors of self-similar fractals are usually defined as limit sets of infinite iteration, while infinite continued-fraction expansions are used to approximate irrational numbers. Within the FCFG framework, this paper explores the correspondence between finite-level continued-fraction recursive structures and finitely iterated fractals: fractals embody geometric recursion, while continued fractions embody arithmetic recursion, and the two share recursion as their core structure. Using the self-similar scaling ratio as a bridge linking the two, this paper discusses how the value of a finite continued fraction can characterize this ratio. It also examines the influence of changes in the continued-fraction coefficient sequence on iterative morphology and analyzes the generative path of iterative structures from regular order toward complex distortion. This paper aims to establish a research thread leading from number-theoretic sequences to the evolution of geometric morphology. The parts concerning evolutionary identification and rigorous chaos determination are presented as hypotheses to be tested.
Keywords: continued fractions; fractal geometry; self-similar scaling ratio; ordered structures; complex forms; FCFG
1. Introduction
The correspondence between number and shape has long been a theme of sustained discussion in mathematics. From analytic geometry, which established a correspondence between algebra and geometry, to fractal geometry, which characterizes irregular multi-level structures that Euclidean geometry finds difficult to describe, researchers have continued to seek underlying laws unifying number and shape. Fractal geometry takes self-similar recursive mappings as its core and is suitable for describing a large number of complex forms in nature; continued fractions are a classical recursive expression in number theory that achieve rational approximation of real numbers through layer-by-layer nesting and are a typical form of discrete arithmetic recursion.
For a long time, fractal geometry and continued fractions have mostly been studied separately: fractal research focuses on iterative figures, morphological evolution, Hausdorff dimension, and other features, often taking limit sets of infinite iteration as its object of study; continued-fraction research focuses on approximation properties, convergence behavior, periodic expansions, and other number-theoretic problems, mainly as a numerical approximation tool. Relatively little work has specifically discussed the shared origin of their recursive structures themselves. A common view is that a complete fractal attractor is the limit of infinite iteration, while finite iteration yields only an approximate figure; a finite continued fraction is merely a rational approximation and does not have independent significance for characterizing fractal structure.
The starting point of this paper is that the common core of fractals and continued fractions is recursive iteration: fractals are geometric recursion at the spatial level, and continued fractions are arithmetic recursion at the numerical level; the two have structural homology. The key feature of a fractal comes from the self-similar scaling ratio, which does not depend on the boundary or area generated by infinite iteration; a finite number of iterations is sufficient to determine a set of self-similar scaling rules, and a finite continued fraction can serve as a candidate carrier for expressing this ratio. On this basis, this paper examines the regulatory role of the continued-fraction coefficient sequence on iterative morphology and explores the generative path of transition from ordered structures to complex forms.
The structure of this paper is as follows: Section 2 establishes the shared-origin structural basis of finite continued fractions and finitely iterated fractals; Section 3 discusses hypotheses concerning the regulation of geometric morphological evolution by coefficient sequences; Section 4 discusses the research significance and potential application directions of this framework; Section 5 concludes.
2. Foundations of Shared Origin and Structural Correspondence Between Finite Continued Fractions and Fractal Geometry
2.1 Recursive Homology at the Structural Level
The core of a self-similar fractal is a set of recursive mappings that repeatedly copy and nest local parts into the whole according to a fixed scaling ratio; its core operation is geometric recursion.
Definition of a finite-level simple continued fraction: Let n be a finite positive integer. The finite continued fraction
r_n=\cfrac{1}{a_1+\cfrac{1}{a_2+\ddots+\cfrac{1}{a_n}}}
is an arithmetic recursion that computes through layer-by-layer nesting of the level coefficients and outputs a rational number.
Stripping away surface representations such as figures and numerical values, the two share the same organizing mode of recursive iteration: one acts on geometric space, and the other acts on the number field. This is the basis on which a correspondence between the two can be established within the FCFG framework.
2.2 Discussion of Number–Shape Correspondence Under Finite Conditions
Traditional approaches tend to focus on infinite limits, resulting in two common perspectives: a complete fractal attractor arises from infinite iteration; the exact expression of an irrational number requires an infinite continued fraction. This paper proposes the following research hypotheses:
1. The self-similar scaling ratio is the core parameter determining the type of fractal structure; finite iteration is sufficient to determine this scaling rule, without waiting for an infinite limit;
2. Geometric surface features of a fractal, such as area and boundary, change with the number of iterations and are not suitable for direct numerical equivalence with continued fractions;
3. Hypothesis: The value r_n of a finite continued fraction can serve as a characterizing quantity for the self-similar scaling ratio of the corresponding finitely iterated fractal, thereby establishing a correspondence between number and shape.
Based on these hypotheses, a connection between continued-fraction sequences and fractal structures can be established at the level of finite iteration, without forcibly requiring infinite expansion.
3. Hypotheses on Continued-Fraction Coefficient Sequences and the Emergence of Complex Forms
On the basis of the above hypothesis of shared number–shape origin, this section proposes a set of hypotheses establishing correspondences among coefficient sequences, scaling ratios, and geometric morphology.
3.1 Variable Description
In this finite continued-fraction model:
· \{a_1,a_2,\dots,a_n\} is the layer-by-layer iteration coefficient sequence, serving as the control parameters of the recursive system;
· r_n is the value of the finite continued fraction, hypothesized to be the self-similar scaling characterizing quantity of the corresponding fractal, affecting the nested morphology of the fractal.
3.2 Constant Coefficient Sequences: Regular and Ordered Iterative Structures
If all level coefficients take the same constant:
a_1=a_2=\cdots=a_n=C,
the coefficient sequence remains unchanged, and the recursive rule is fixed. At this point, the computation path of the continued fraction is determined, yielding a stable characterizing value r_n. A fixed scaling rule produces iterative figures that are uniform, symmetric, and consistent in nesting mode, with a regular and ordered morphology.
Typical example: a finite continued fraction with all coefficients equal to 1, whose value gradually approaches the golden-section value \varphi\approx0.618, corresponds to a highly symmetric self-similar nested structure and is a typical sample of ordered structure.
3.3 Variable Coefficient Sequences: From Structural Distortion to Complex Forms
If the level coefficient a_k changes with the level number and no globally constant coefficient exists, the recursive rule changes from layer to layer:
1. Changes in coefficients cause a shift in the characterizing quantity r_n, and the scaling rules at different levels are no longer uniform;
2. The unified nesting paradigm is broken; local self-similar scales differ from one another; the figure exhibits distortion and fragmentation; and the morphology tends toward complexity;
3. Hypothesis: When the coefficient sequence is aperiodic and lacks stable regularity, the iterated morphology may exhibit highly complex patterns; however, rigorous chaos (satisfying chaos definitions such as sensitive dependence on initial conditions and topological transitivity) still requires separate verification of dynamical conditions and cannot be determined directly from coefficient changes alone.
3.4 Summary of the Evolutionary Path
This set of hypotheses can be summarized as:
\begin{cases}
\text{Constant coefficient sequence} \rightarrow \text{stable scaling rule} \rightarrow \text{ordered symmetric iterative structure}\\
\text{Variable coefficient sequence} \rightarrow \text{layer-by-layer drift of scaling rule} \rightarrow \text{distortion and complex morphology}
\end{cases}
The coefficient sequence is the core parameter regulating whether iterative morphology tends toward order or complexity. This path provides a discrete-recursive perspective for understanding the generation of complex geometric forms.
4. Theoretical Perspective and Potential Value
4.1 Positioning of This Work
1. Innovative perspective: It focuses on the shared origin of the recursive structures themselves and discusses finite continued fractions and finitely iterated fractals within the same recursive framework, as an extension direction of the FCFG system;
2. Hypothesized regulatory mechanism: It treats the continued-fraction coefficient sequence as a control parameter for morphological evolution and provides a research thread of “discrete number-theoretic sequence → scaling parameter → geometric morphology”;
3. Cross-directional connection: It attempts to build an intermediate research path among number theory, fractal geometry, and complex systems.
Note: The statements concerning number–shape correspondence and morphological evolution in this paper are hypotheses within the framework and await verification through subsequent construction of examples, derivations, and numerical experiments.
4.2 Potential Application Directions
This framework may provide a descriptive approach for complex forms in nature: crystals and symmetric steady-state structures can be analogized to stable-coefficient recursion, while complex structures such as turbulence and irregular landforms can be analogized to scale distortion caused by continuously changing recursive coefficients.
At the same time, this idea is expected to provide a parameterization scheme driven by continued-fraction sequences for discrete geometric modeling and the generation of complex iterated graphics.
5. Conclusion
The geometric recursion of fractals and the arithmetic recursion of continued fractions share a common origin in their organizing mode. From the FCFG perspective, one can move beyond the habit of focusing only on infinite limits and explore the possibility that finite continued fractions characterize self-similar scaling ratios.
This paper proposes a set of hypotheses: the coefficient sequence of a continued fraction regulates the recursive rule at each level; constant coefficients tend to generate regular and ordered nested structures, while changing and aperiodic coefficient sequences can drive iterative structures to distort and generate complex forms.
This paper provides a research thread from discrete recursion to geometrically ordered and complex forms. Rigorous proofs of the relevant hypotheses, dynamical tests, and validation with concrete examples are tasks to be advanced in subsequent work. This direction can serve as an extension of the basic IFS framework of FCFG.
References
[1] Mandelbrot, B. The Fractal Geometry of Nature. W. H. Freeman, 1982.
[2] Khintchine, A. Y. Continued Fractions. Dover, 1964.
[3] Zhang Suhang. Fractal Continued-Fraction Geometry (FCFG): A Framework for the Correspondence Between Continued-Fraction Recursion and IFS Fractal Iteration. 2026.
[4] Falconer, K. Fractal Geometry: Mathematical Foundations and Applications. Wiley, 2014.